High Strength Container Transport Triple Axle Trailer With Emergency Valve / manufacturer from China SINOTRUK HUBEI HUAWIN SPECIAL VEHICLE CO.,LTD.

High Strength Container Transport Triple Axle Trailer With Emergency Valve

Place of Origin:

Hubei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: /

High Strength Container Transport Triple Axle Trailer With Emergency Valve

High Strength Container Transport Triple Axle Trailer With Emergency Valve

Product Description:

1. Container Transport Semi Trailer With a loading capacity in the range between 25 and 60m³, our fuel tank semi trailer often comes in various types, the most common being the 2-axle and 3-axle configurations.

Q235 carbon steel, stainless steel, or aluminum is often used to construct the tank. The tank chamber is separated into several sections by upright walls, or partition walls. These walls prevent the formation of petrol wave when the tank trailer is driving on a bumpy road. At the lower end of the wall, through holes are drilled to reduce the impact and enhance the tank strength.

2. The loading deck can be concave beams, tire appeared cover, totally flatbed, or extendable.

3. The loading ramps can be rear end designed, or front loading ladders, which can be mechanic spring ladders and hydraulic loading ramps by different needs

4. The material of the tank can be Aluminum, Alloy, Steel, Carbon Steel etc.

Standard Configurations:

Tank Body	ShapeRound or Square
Dimension	12000mm×2490mm×3990mm ( The exact size depends on the final design.)
Tare Weight	(Semi Trailer)About 8T-12T
Total Volume(m3)	25m³ -60 m³
Tanker Body	5mm or 6mm/ Material Q235 carbon steel
End Plate	5mm or 6mm /Q235 carbon steel
Compartment	1 to 9 optional
Manhole Cover	Carbon steel or Aluminum 500mm(Diameter)
Discharging Valve	Diameter is 3 or 4 inch (Material: Aluminum)
Discharging Pipe	3 or 4 inch rubber hose, 2pcs, 6m/each
Cat Walk	With (Common model or special design)
Axle	2 or 3 axles, 12T/13T/16T, BPW/FUWA/HUAJING brand
BLanding Gear	JOST (D200T) or CHINA BRAND 28T
King Pin	JOST 2.00 or 3.5 inch bolt-in king pin
Suspension	Mechanical suspension/Germany or America type /Air Suspension
Leaf Spring	90(W)mm×13(Thickness)mm×10 Layers or 100mm×12mm×12 layers
Pneumatic Braking System	WABCO RE 6 relay valve; T30/30+T30 Spring brake chamber (TKL brand); 45L air tank
Rim	9.00-22.5/8.00-20/8.5-20 Chinese Brand
Tire	12.00R22.5/315 80R22.5/11.00R20 /12.00R20 Brand can be Optional
Tool box	1m × 0.5m × 0.5m (The tool box contains 1 tire spanner, 1 gudgeon sleeve and 1 cranking bar. Its size can be tailored to suit your needs.)
ABS	Optional
Painting	Sandblasted, anti-rust chassis surface is available with 1 layer of anticorrosive primer and 2 layers of top coats.